Sandisk releases NAS SSDs with up to 7.68 TB capacity and 14,900 MB/s read speeds

What happened

Sandisk's NAS 600 and NAS 800 SSDs are now available, with capacities of up to 4 TB and 7.68 TB, respectively. Shahadat Ali , Published 10/12/2026 NAS Storage Launch Sandisk has released two SSD series designed for NAS (network-attached storage) systems .

The NAS 600 is available in capacities ranging from 500 GB to 4 TB. The SATA model delivers read speeds of up to 560 MB/s, while the PCIe 5.0 model reaches 14,900 MB/s.

The NAS 600 operates with a 2.5-inch SATA interface, while the NAS 800 is an M.2 2280 NVMe drive with PCIe 5.0 support. It reaches sequential read speeds of up to 560 MB/s, with write speeds varying by capacity.

The 500 GB model is rated at up to 505 MB/s, the 1 TB and 2 TB versions at up to 515 MB/s, and the 4 TB model at up to 520 MB/s. Samsung specifies write speeds of up to 530 MB/s.

Sandisk rates its 4 TB NAS 600 for up to 2,500 TBW, slightly higher than the 2,400 TBW rating of the 4 TB 870 EVO. Sandisk specifies an MTTF (Mean Time to Failure) of up to 2.25 million hours for the NAS 600. The drive also comes with a five-year limited warranty.

Key facts

• Shahadat Ali , Published 10/12/2026 NAS Storage Launch Sandisk has — released: two SSD series designed for NAS (network-attached storage) systems
• The NAS 600 — uses: a 2.5-inch SATA interface, while the NAS 800 is an M.2 2280 NVMe drive with PCIe 5.0 support