WORLDTECHFPGA for All — CERN Releases “colibri” VHDL Library
WORLDTECH Brief: a short report of a current development, carrying only what WORLDTECH can ground in the sources below. It is expanded into a full WORLDTECH Story if further usable material becomes available.
Single source: this development was reported by Hackaday. What WORLDTECH can establish is that the report was made, and by whom. It has not been matched against a second independent organisation and has not been officially confirmed by the organisations involved.
What happened
Speaking of tested, you get self-checking testbenches in there to make sure everything’s working, and there’s even formal verification, at least for some things. Like a lot of what CERN gives away under its CERN Open Hardware Licence, this library and the functions in it were developed in house to make CERN run better– specifically to streamline the development of gateway devices. The whole thing is on GitLab if you want to take a look.
Sources & evidence
- Hackaday Reporting source
FPGA for All — CERN Releases “colibri” VHDL Library ↗
https://hackaday.com/2026/09/24/fpga-for-all-cern-releases-colibri-vhdl-library/